 |
|
You are here: Foswiki>AGLT2 Web>MSUSetupRackPDU (16 Oct 2009, TomRockwell)Edit Attach
for big three phase PDUs
The rearmost PDU is -1. In these racks the rearmost PDU is inverted (its cord comes out the top).- place label like "MAC 00:00:00:00:00:00" on face with mac address (find on paper slip or back of PDU)
- place label like "PDU-106-1" on face
- place label on plug like "PDU-106-1"
- mount 3 cord brackets, note that they can be reversed, but should be mounted so that the are closer side-to-side to the outlets
- install cords to outlets, lengths per table
- cable tie cords
- label cords, numbering per table
| PDU | Outlet | Cord Length (inches) | Label |
|---|---|---|---|
| -1 | 1 (c19) | 12 | 1 |
| -1 | 2 | 12 | 2 |
| -1 | 3 | 12 | 3 |
| -1 | 4 | 12 | 4 |
| -1 | 5 | 12 | 5 |
| -1 | 6 | 12 | 6 |
| -1 | 7 | 12 | 7 |
| -1 | 8 | 12 | 8 |
| -1 | 9 | unused | |
| -1 | 10 | 18 | 9 |
| -1 | 11 | 18 | 10 |
| -1 | 12 | 12 | 12 |
| -1 | 13 | 12 | 13 |
| -1 | 14 | 12 | 14 |
| -1 | 15 | 12 | 15 |
| -1 | 16 | 12 | 16 |
| -1 | 17 (c19) | special | door |
| -1 | 18 | 12 | 22 |
| -1 | 19 | 12 | 23 |
| -1 | 20 | 12 | 24 |
| -1 | 21 | 12 | 25 |
| -1 | 22 | 12 | 26 |
| -1 | 23 | unused | |
| -1 | 24 | unused | |
| PDU | Outlet | Cord Length (inches)* | Label |
|---|---|---|---|
| -2 | 1 (c19) | 12 | 42 |
| -2 | 2 | 12 | 41 |
| -2 | 3 | 12 | 40 |
| -2 | 4 | 12 | 39 |
| -2 | 5 | 12 | 38 |
| -2 | 6 | 12 | 37 |
| -2 | 7 | 12 | 36 |
| -2 | 8 | 12 | 35 |
| -2 | 9 | unused | |
| -2 | 10 | 18 | 34 |
| -2 | 11 | 18 | 33 |
| -2 | 12 | 12 | 31 |
| -2 | 13 | 12 | 30 |
| -2 | 14 | 12 | 29 |
| -2 | 15 | 12 | 28 |
| -2 | 16 | 12 | 27 |
| -2 | 17 (c19) | special | door |
| -2 | 18 | 12 | 21 |
| -2 | 19 | 12 | 20 |
| -2 | 20 | 12 | 19 |
| -2 | 21 | 12 | 18 |
| -2 | 22 | 12 | 17 |
| -2 | 23 | unused | |
| -2 | 24 | unused | |
for storage racks
- the rearmost PDU is -1 and gets plugged into the UPS
- place label like "MAC 00:00:00:00:00:00" on face with mac address (find on paper slip or back of PDU)
- place label like "PDU-106-1" on face
- place label on plug like "PDU-106-1"
- mount 2 cord brackets, note that they can be reversed, but should be mounted so that the are closer side-to-side to the outlets
- install cords to outlets, lengths per table
- cable tie cords
- we don't have a scheme for labeling these cords, though it might be useful
- use the plastic cord retaining clips on PS for md1000s and pe2950s
| PDU | Outlet | Cord Length (inches) | Goes to |
|---|---|---|---|
| -1 | 1 | 36 | shelf D Left |
| -1 | 2 | 36 | shelf C |
| -1 | 3 | 30 | pe2950 |
| -1 | 4 | 24 | shelf B |
| -1 | 5 | 24 | shelf A |
| -1 | 11 | 24 | shelf D |
| -1 | 12 | 24 | shelf C |
| -1 | 13 | 30 | pe2950 |
| -1 | 14 | 24 | shelf B |
| -1 | 15 | 24 | shelf A |
| PDU | Outlet | Cord Length (inches) | Goes to |
|---|---|---|---|
| -2 | 1 | 36 | shelf D Right |
| -2 | 2 | 36 | shelf C |
| -2 | 3 | 30 | pe2950 |
| -2 | 4 | 36 | shelf B |
| -2 | 5 | 36 | shelf A |
| -2 | 11 | 36 | shelf D |
| -2 | 12 | 36 | shelf C |
| -2 | 13 | 30 | pe2950 |
| -2 | 14 | 36 | shelf B |
| -2 | 15 | 36 | shelf A |
Edit | Attach | Print version | History: r5 < r4 < r3 < r2 | Backlinks | View wiki text | Edit wiki text | More topic actions
Topic revision: r5 - 16 Oct 2009, TomRockwell
AGLT2
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding Foswiki? Send feedback